Classical Marble Furniture Religious Church Pulpit Sculpture
A church pulpit is a Christian platform for a preacher. The traditional pulpit is elevated above the surrounding floor to improve audibility and visibility, accessible by steps and about waist-high on both sides. Take a look at our church pulpit sculpture. This is a marble church pulpit. It looks very delicate. Above the pulpit, there was an eagle logo, and below, an open Bible and a cross. The pulpit is a wonderful ornament for a church.
|MATERIAL:||NATURAL MARBLE / GRANITE|
|SIZE:||LIFE SIZE / CUSTOMIZED SIZE|
|SERVICE:||CUSTOMIZED HAND CARVING|
|ADVANTAGE:||Factory Direct, Door to Door Delivery|
|CONTRACT MANUFACTORYING:||OEM Service Offered
Design Service Offered
Buyer Label Offered
|SERVICE:||Factory Direct, Door to Door Delivery ETC.|
The use of the church pulpit
The pulpit was usually reserved for the clergy. These are some of the rules of the Catholic Church and other religions. Even among the non-conformists of Wales, this was considered proper, and in some small churches, a second pulpit was built opposite the main pulpit for exhortation, testimony, and other speeches of the lay. Many churches have a second, smaller lectern, called a lectern, on the epistle side that lay members can use, often for other Bible classes and general announcements. The traditional Catholic pulpit on the left side of the chancel or nave is usually reserved for Lutherans and many Anglicans. In Presbyterian and Baptist churches, the pulpit is located in the center behind the table. Many modern Roman Catholic churches have an Amber that doubles as a pulpit and podium.
The position of the pulpit in a church
In Catholic and Protestant churches, the pulpit may be located closer to the main congregation in the nave, either on the nave side of the church at a crossroads, or on the nave side of the church. This is especially true in large churches to ensure that the preacher’s voice is heard by all congregations. In the history of the church building, the fixed seating of congregations was relatively late, so the preachers behind some congregations were less of a problem than later. Fixed forward-facing seats in the nave and modern electric amplifiers tend to reduce the use of pulpits in the middle of the nave. Outdoor pulpits can also be found in several denominations, usually attached to the exterior of the church or to the preaching cross. If connected to the outer wall of the church, it can be accessed through a doorway in the wall or by steps outside. Take a look at our church pulpit sculpture. You can put our pulpit sculpture in the church to add a little more religious feel to the whole church. We also have a wide selection of sculptures for religious decoration. If you are interested in it, welcome to contact us.
1. Confirming the details drawing / 3D mold / Pictures with clients.
|2. Making clay mold according to drawing / client’s photos / 3D mold if it is neccessary.|
|3. Cut the big stone block depends on confirmed sculpture size.|
|4. Experienced engravers start to engrave depends on mold / confirmed pictures.|
|5.Highly polish the surface till sculptures is shiny.|
|6. Packing into wooden cases after clients are satisfied with sculptures.|
|PACKAGING:||INSIDE: SOFT PLASTIC FOAM/ BLANKET.|
|OUTSIDE : STRONG WOODEN CASES OR IRON BOXES.|
|SHIPPING:||1. BY SEA (SPECIAL FOR LIFE SIZE SCULPTURES AND LARGE SCULPTURES).|
|2. BY AIR (SPECIAL FOR SMALL SCULPTURES OR WHEN CLIENTS NEED SCULPTURE VERY URGENTLY).|
|3.BY EXPRESS DELIVERY DHL, TNT, UPS OR FEDEX.. (DOOR TO DOOR DOOR DELIVERY, ABOUT 3-7 DAYS CAN REACH).|
|Please kindly contact us! We will depends on your sculpture and local situation, find a best delivery way for your reference.|